Fiber 9.2mm SMPTE 311M: UL Riser HFCPVDownload PDF
A precision SMPTE 311M cable designed for use in permanent installation applications. The 2 single-mode fibers for multiplexed video, audio and data delivers exceptionally low-loss for HD camera to CCU interconnects. All copper conductors are insulated with a polyethylene dielectric for exceptional heat and current leakage resistance. For added durability, the two single-mode fiber elements are coated with a high tensile strength CPE tight buffer that achieves three times the tensile strength as compared to typical PVC tight buffer compounds. The outer jacket is extruded from a flame retardant PVC compound that is easy-to-pull through conduit and UL listed CMR for permanent installation in most applications.
This item may be considered non-stock and carry a minimum order requirement. For immediate stock see item HFCDBR
Price is not set for this product.
Typical Lead Time: 0 Days
Email a Friend
Not enough Inventory? Submit your email address and desired total quantity below, and we will notify you when stock arrives.
(2) 8.9u Single-Mode, 900u CPE Tight Buffer (1 yellow, 1 blue)
(4) 20AWG (19 x 32AWG) TC Conductors
PE Insulation .057”
(2) 24G (7 x 32G) TC Conductors
PE Insulation .044” O.D. (1 red, 1 gray)
(1) 16G Galvanized Steel (19 x 29G) White
95% TC Braid
9.2 mm (.362”) O.D.
Operating Temperature: -20°C to +75°C
Tensile Strength: 700 N (min)
Bend Radius: 2.54"
Weight: 91 lbs.
Optical & Electrical Characteristics
Insulation ResistanceAux: >10M Ω/Mft
Signal: >10M Ω/Mft
Aux: 9.6 Ω/Mft
Signal: 23.5 Ω/Mft
Shield: 5.2 Ω/Mft
<0.70 dB/km (1250nm - 1625nm)