3 Ch.SMPTE 311M Hybrid: Riser HFC3R
HFC3R
Clark’s HFC3R is a composite cable that is specifically designed for the distribution of all the copper and fiber elements required for three SMPTE hybrid fiber camera positions within a single cable. Each shielded copper group contains two 18AWG auxiliary conductors and two 24AWG signal conductors with a drain wire for shield termination. The fiber elements consist of six individual simplex single-mode breakout cables that are numerically printed for identification. UL Rated CMR, the HFC3R is constructed from flame retardant PVC compounds to allow for permanent installation in most building spaces.
This product has been replaced with item # HFC3DBR and otherwise carry a minumum order requirement.
Price is not set for this product.
Typical Lead Time: 0 Days
Fiber Elements
(6) 8.9u Single-Mode, 3.0mm Simplex Fiber (Numbered 1 - 6)
Copper Sub Groups
(3) Shielded Bundles that each consist of:
(2) 18G (19x30AWG) TC Conductors w/ .078” PVC Insulation(2) 24G (7x32G) TC Conductors w/ .044” PVC Insulation
(1) 22G (7x30AWG) TC Conductor Drain Wire
100% Foil Overall Shield w/ Outer Mylar Coating
FIller
Solid PVC Central Filler
Outter Jacket
PVC Yellow w/ Red Stripe .630” O.D.
Mechanical Characteristics
Operating Temperature: -15°C to +75°C
Bend Radius: 6.30"
Weight: 200 lbs.
Optical & Electrical Characteristics
Insulation Resistance
10M Ω/Mft
DCR
18G (19x30): 6.0 Ω/Mft
24G (7x32): 23.5 Ω/Mft
22G (7x30): 14.4 Ω/Mft
Dielectric Strength
3000V RMS
Optical Attenuation
<0.70 dB/km (1250nm - 1625nm)
Frequently Bought
