Neutrik 2 pole right-angle 1/4" professional phone plug, nickel contacts, black shell - NP2RX-BAG
NP2RX-BAG
The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).
$6.97 / each
Out of Stock - Please contact support
| Contact plating | 0.2 µm Ni (Su) |
| Contacts | Brass (CuZn39Pb3) |
| Insert | Polyamide (PA 6.6 30 % GR) |
| Shell | Zinc diecast (ZnAl4Cu1) |
| Shell plating | Black Chromium |
| Strain relief | Polyacetal (POM) |
Mechanical
| Cable O.D. | 4 - 7 mm |
| Wiring | Solder Contacts |
| Lifetime | > 1000 mating cycles |
| Wire Size | max. 14 mm² |
| Wire Size | max. 18 AWG |
Electrical
| Contact Resistance | depends on mating connector mΩ |
| Dielectric Strength | 1 kVdc |
| Insulation Resistance | > 2 GΩ (initial) |
| Rated Current (per contact) | depends on mating connector A |
| Rated Voltage | < 50 V |
