M-Series
Messenger Cables Product Specifications Click
to View Light Medium Heavy
How to Use the Product Specifications
Charts Determine
the desired fiber count, span length (pole spacing) and storm
load rating for your application. Select the chart which describes
your NESC Storm Load Rating (from the map below) and the desired
cable style. Enter the selection chart from the left, selecting
the row for the appropriate fiber count. Then go across this
row until you reach the number equal to or greater than the
desired span length in meters. At the bottom of this column
is the "Messenger Designation: for the desired cable.
Complete the part number suffix with this Messenger Designation
and the selection of strength member.
Example
If the
application is in Florida, the storm load map indicates that
this is NESC Storm Load Rating "Light". Considering
the prevalence of thunderstorms, the Dielectric Messenger
is chosen from the chart below. If the requirement id for
an 8-fiber cable, with the longest span length being 65 meters,
enter the chart from the left (at 8 fibers), go across that
row to "70", the next higher span length, and down
that column to the letter "E". The part number suffix
then becomes "-EDS" (Messenger Designation"E"
with dielectric strength member "DS").