DX-Series Distribution Cables, Riser Rated and Plenum Rated.
Compact cable design for limited Conduit space.
Flexible, rugged high-strength construction for long cable pulls
May be directly terminated with connectors with physical protection at termination points.
Lower total installed costs.
Suitable for both indoor and outdoor use - no need to splice outdoor cable to indoor cable at the building entrance.
2 to 156 fibers, higher fiber counts are available upon request.
BX-Series Breakout Cables, Riser-Rated and Plenum Rated
More
rugged than the DX series, this tight-buffer cable design
allows the cable to be hung vertically in building risers
without concern for fiber axial migration.
Most user friendly design and construction for LAN applications.
Fibers may be directly terminated using connectors, with no further protection required.
Suitable for both indoor and outdoor use - no need to splice outdoor cable to indoor cable at the building entrance.
2 to 108 fibers, higher fiber counts are available upon request.
GX-Series Subgrouping Cables, Riser-Rated and Plenum Rated
Tight-buffer multifiber cable design allows subbundles to be routes to separate areas needing high fiber counts. Also available for for fiber hybrid/composite cables.
Facilitates fiber identification of single-mode and multimode fibers in a single cable.
May be directly terminated with connectors with physical protection at termination points.
Ideal separation and identification of single-mode and multimode fibers in a single cable.
Suitable for both indoor and outdoor use - no need to splice outdoor cable to indoor cable at the building entrance.
2 to 144 fibers in various subgroup cable sizes.
AX-Series Assembly Cables, Riser-Rated and Plenum Rated
Resilient and flexible for jumpers, patch cords and pigtails
Suitable for general purpose indoor use, such as routing connections in patching systems.
Short "patch cord" cables ideal for links between electronic equipment and main fiber optic cables..
Compatible with all standard fiber optic connectors
Available in 1.6 mm diameter micro design for small form-factor simplex and duplex connectors.
1 and 2 fibers available.
M-Series Aerial Messenger Cables
All dielectric, stainless steel or galvanized steel self supporting messengered construction for D-Series, multifiber tight buffer cables.
Designed to meet NESC storm load rating of light, medium or heavy.
Can cut installation costs by half.
RM-Series Round Messenger Cables
Round construction for minimum wind drag and ice buildup.
Increases span length capability.
Aramid strength members reduce weight for longer span lengths.
Lightweight, all-dielectric self supporting (ADSS) construction is ideal for use near electrical power lines.
Armored Cables DX-Series Distribution, BX-Series Breakout and GX-Series Subgrouping Cables.
Suitable for direct burial and aerial applications.
Corrugated steel tape protects fiber optic cable from rodents and provides additional stiffness for aerial lashing, if required.
The armor is easily removed with an internal aramid strength member ripcord, leaving a flame-retardant, inner cable suitable for interior and exterior use. This eliminates the need to splice outdoor cable to indoor cable to meet the National Electrical Code's 50 foot maximum length requirement for outdoor cable used for inside buildings.
Armored Cables FRP Jackets
Fiberglass Rodent Protection (FRP)
Provides an effective deterrent to damage caused by small non-burrowing rodents.
For use where cable is exposed in subterranean tunnels, ducts an surface installations.
Military Tactical Cables D-Series Distribution and B Series Breakout Cables
Extra rugged, high strength design.
Crush resistant and resiliant.
Excellent for use in deployment/retrieval applications
Tested and in use in military applications worldwide.
Suitable for manufacturing and mining and petrochemical environments. Excellent chemical resistance.
2-24 fiber count in B-Series Breakout or D-Series Distribution construction available.
