Resilient and flexible for jumpers, patch cords and pigtails.
Suitable for general purpose indoor use, such as routing connections in patching systems.
Short "patch cord" cables ideal for links between electronic equipment and main fiber optic cables.
Flame-retardant.
Compatable with all standard fiber optic connectors.
High performance tight-buffer coating on each optical fiber for environmental and mechanical protection.
Outer
cable jacket color code per TIA-598-A:
Multimode 62.5/125 - Gray
Single-Mode - Yellow
Custom jacket colors are available to match connectors. Private labeling on the cable outer jacket is also available.
1 (simplex) and 2 (duplex) fibers available.
Standards List
Tight-buffer
fiber optic cables meet the functional requirements
of the following standards:
ANSI X3T9.5 PMD
ATM 155 Mb/s
FDDI 100 Mb/s
Fibre Channel FC-PH
GR-409-CORE
ICEA-83-596
TIA-568
TIA-598-A
TIA-758
UL-listed type OFNR in accordance with NEC sections 770-51 (b) and 770-53 (b) for use in vertical runs in building riser shafts or from floor to floor. Meets or exceeds requirements for intra-building fiber optic cables as outlined in GR-409-CORE.
UL-listed type OFNP in accordance with NEC sections 770-51 (a) and 770-53 (a) for use in ducts, plenums, and air-handling spaces. Meets or exceeds requirements for intra-building fiber optic cables as outlined in GR-409-CORE
General
Characteristics for AX-Series Assembly Cables
Riser
PLENUM
Minimum
Bend Radius:
Under Installation Tensile Load
5
cm
5
cm
Under
Long-Term Tensile Load
3
cm
3
cm
Jacket
Type
Flexible
PVC "N"
Soft
Plenum "S"
Operating
Temperature
-40°C
to +85°C
-20°C
to +85°C
Storage
Temperature
-55°C
to +85°C
-40C
to +85C
Crush
Resistance
750 N/cm
500
N/cm
Impact
Resistance
1,000
impacts
200
impacts
Flex
Resistance
7,500
cycles
2,000
cycles
These
specifications are subject to change without prior notification.
