Clark’s HFC3DBR is a composite cable that is specifically designed for the distribution of all the copper and fiber elements required for three SMPTE hybrid fiber camera positions within a single cable. Each shielded copper group contains two 18AWG auxiliary conductors and two 24AWG signal conductors with a drain wire for shield termination. The fiber elements consist of six individual simplex single-mode breakout cables that are numerically printed for identification. The outer jacket is extruded from a flame retardant PVC compound over a water-blocking tape that wraps around the inner core. This construction is both UL listed and provides an additional level of protection by absorbing moisture within the water-blocking tape in the event that the jacket is penetrated.