SMPTE ModBox

Clark Wire & Cable's new modular box, the ModBox, is a complete SMPTE modular box with up to eight modules. The ModBox was created to make it easy for the user. Instead of encountering a complicated problem or potential failure from the box, the modules in the ModBox are already assembled and easy to remove and replace in less than one minute. Because of the difficulty of assembling a similar SMPTE box, Clark has assembled this prewired SMPTE box, saving the unnecessary downtime. Also, this box has a removable side panel to access the inside of the module and each module has a designation strip located horizontally across the top of the module.

The Clark SMPTE modular box provides a modular system for high definition signals to camera and CCU applications. The box is made out of metal and connects SMPTE 304M Panel Mounts to the frame, which are broken out to a control unit and 2 single mode SC fiber optic connectors.

Features

Uses up to 8 connectors
All metal heavy duty frame
Copper connectors
2 Fiber Optic SC connectors
8 separate removable modules
Removable side panel for each module
Used with SMPTE 311M Cable

SMPTE Box with 8 removable Plug Modules

Part #	Description	Get Quote
MB-FK-*P	SMPTE Box with removable Plug Modules

* = Number of Modules in Rack

P=Plug Modules

Replace P to S for Socket Modules

SMPTE Box with 8 removable Socket Modules

Part #	Description	Get Quote
MB-FK-*S	SMPTE Box with removable Socket Modules

* = Number of Modules in Rack

S=Socket Modules

Replace S to P for Plug Modules

SMPTE Box Individual Plug Modules

Part #	Description	Get Quote
MB-PM	SMPTE Box Individual Plug Modules

SMPTE Box Individual Socket Modules

Part #	Description	Get Quote
MB-SM	SMPTE Box Individual Socket Modules

SMPTE Box Frame Kit

Part #	Description	Get Quote
MB-FK	SMPTE Box Frame Kit