Return to the Clark Homepage
 

 

RCA Crimp Connectors

 

The RCA connector is the universally accepted method of terminating coaxial cable

for audio and video signals in Prosumer-type products such as video decks,

DVD's, video projectors, and HD monitors.

RCAP-C Series

  • Standard 75 Ohm construction; Crimp pin & sleeve
     
  • DC to 200MHz; >26dB Return Loss (<1.1 VSWR)
     
  • Absolutely no soldering required
     
  • Assembly time reduced by 80%
     
  • Superior cable pull strength
     
  • Internal pressure contact fingers
     
  • Gold plated center shaft

Specifications                 Assembly Instructions

CANARE 75 ohm RCA
Cable Type  Crimp Die

  Part  #

Tool Get Quote
 CD7506

TCD-35CA

RCAP-53

 TC-1
RG59B/U TCD-451CA
RCAP-C4A
CD7559      500 Series TCD-451CA
RCAP-C4F
CAMPLEX1

TCD-5CF
RCAP-C77

 

Nominal Specifications
Model RCAP-C   Series
Parts Body, Crimp Pin, Sleeve
Imp. 75 ohm
Bandwidth VSWR (Return Loss) DC to 200MHz <1.1 (>26dB)
Body Material (Plating) Brass (Nickel)
Center Contact Material (Plating) Phosphor Bronze (Gold)
Outer Contact Material (Plating) Beryllium Copper (Gold)
Dielectric Material PPO Noryl
Crimp Pin Material (Plating) Brass (Gold)
Crimp Sleeve Material (Plating) Copper (Tin)
Cable Retention lbs. (kgs) >55 (>24.9)
Insulation Resistance at 500V DC >100M ohm
Voltage Rating for 1 mim. 500V AC (rms)
Center Contact Resistance <10m ohm
Outer Contact Resistance --

 

 

Assembly Instructions

 

Note: All of Canare crimp plugs, BCP-C, RCAP-C and FP-C, are the same procedure.


Canare Crimp Plugs Assemble Instruction

  

Back to top

 

 

 
 
 
© 2011 Clark Wire & Cable       1-800-CABLE-IT  (800-222-5348)