| ELECTRICAL |
|
| Characteristic Impedance: |
75 ohm |
| Voltage Rating: |
1000 Volts RMS |
| Insertion Loss: |
< 0.6 dB 1 MHz to 1 GHz (measured with 1 meter of 728 cable) |
| Return Loss: |
Better than 35 dB to 1 GHz; 30 dB to 2 GHz; 26 dB to 3 GHz |
| Contact Resistance: |
.030 Ohms maximum change post environmental |
| Insulation Resistance: |
200 MΩ minimum change |
| MECHANICAL |
|
| Mechanical Durability: |
500 cycles minimum |
| Center Contact Retention: |
6 lbs. min |
| Coupling Mechanism: |
80 lbs. min |
| Cable Pulloff Force: |
Dependent on cable size |
| Cable Bend and Twist: |
500 cycles min |
| Force to Engage/Disengage: |
Torque 20 in/lb min. |
| Interface Dimension: |
See interface below |
ENVIRONMENTAL
|
|
| Thermal Shock: |
-40°C to 35°C operating; -55°C to 85°C, non-operating |
| Moisture Resistance: |
0% to 95%; MIL-STD-202 Method 106 |
| Corrosion (Salt Spray): |
MIL-STD-202 Method 101, Test Condition B |
| Flammability: |
UL 94-VO rated (center conductor insulator) |
| Vibration: |
MIL-STD-202 Method 201 |
| Solvent Resistance: |
MIL-STD-202 Method 215 |
FINISH
|
|
| Body/Bayonet: |
Tarnish-resistant electroless nickel plating
|
| Center Conductor: |
50 millionths inch gold plating MIL-G-45204 Type 1, Grade C,
Class 1; requires .042" crimp station die |
